A closer look at the NZXT Sentry II Installation
If you have a lot of sunlight or ambient light coming in towards your PC you may have a difficult time reading the display. Here you can see I have switched from Celsius to Farenheit.
Fan display, you can look at what each fan is doing and the temperatures associated with that fan or all five fans at once by pressing here (make sure you memorized which fan is which).
Upper right corner is the reset; press and hold for several seconds (use this when the temperature alarm settings are all torqued up).
This controls the lights, press and hold and the display goes dark.
This is an important button here. You can use it to increase fan speed when in manual, and it sets the temperatures you want the alarms to go off at. Don’t worry, you will hear the alarms going off. I set it purposefully to go off at operating temperatures; it will get your attention.