Prolimatech Lynx CPU Cooler

Testing Methodology

For our testing we will be using the following procedures and parameters to acquire the necessary data:

  • Thermal compound used is Arctic Silver 5
  • Idle temperatures are recorded after the system has been allowed to idle for thirty minutes from the point Windows has finished loading.
  • Load temperatures are recorded by running OCCT for twenty minutes on all available threads.
  • Real Temp is used for the recording of all temperature sensor reading.
  • PWM function is disabled via BIOS to allow the fans to run at full speed.
  • CPU model and overclock speed used for testing are outlined below in “Test Hardware”.
  • Each cooler is first tested with one fan supplied from the manufacturer.
  • Each cooler is then tested again with a second fan attached if provided by the manufacturer.
  • Lastly, the cooler is tested a third time using a neutral set of fans to make all things equal.
  • Neutral fans used are Aerocool Sharks 120mm, 1500RPM, 82.6 CFM, 26.5 dBA.

Test Hardware:

Motherboard: ASUS P67 Deluxe B3
Processor: Intel Core i5 2500K @ 4.5GHz w/ 1.3 voltages
Ram: Crucial 2133 4GB Dual Channel (9-10-9-28)
Video Card: ASUS Radeon HD 5870
HDD: Hitachi 1TB
Power: Thermaltake Tough Power XT 850 (Sponsored by Thermaltake)
Case: Open air
Cooling: Prolimatech Lynx

Results

Subscribe
Notify of
0 Comments
Inline Feedbacks
View all comments