Since the ML240P Mirage includes a Cooler Master ARGB LED controller, you can choose to further customize your lighting with the MasterPlus+ software. To be able to configure your RGB LED Controller, you must make sure you have attached it to a USB header on your motherboard with the included cable.
Once attached, when you boot up the software you should see your controller in the left-hand menu.
After selecting the ARGB2 controller from the left navigation menu, you are brought to a configuration screen to set up your device. From this screen, you select all the hardware connected to the ARGB LED controller.
Once you select the ML240P, you present with the cooler/fans on the left with the ARGB controller on the right. Now you must connect each fan and pump to where you connected them on the ARGB controller. As you can see, we have attached the pump to port A4 and our fans to A1/A2.
Once configured, you are able to apply various light effects such as Color Cycle, Reload, Recoil, Breathing, etc. This seems to apply the effect to all ports and you are not able to apply multiple effects to other ports.