Noctua NA-SAV3 and NA-SAV4 Anti-Vibration Mounts Review

Search form

Posted by ProClockers Hardware Reviews on Thursday, August 3, 2017 - 8:00am

Introduction

Installing cooling fans on your PC chassis can be tricky particularly if go for high-RPM fans or installing on thin aluminum panels. In such scenarios, the fan could produce vibrations that would produce noise and to some extent could lead to damaging your hardware. Fortunately, Noctua got something to address such issues with their NA-SAV3 and NA-SAV4 anti-vibration mounts. Let’s check these out today!

We would like to thank Noctua Premium Cooling Component for sending us their NA-SAV3 and NA-SAV4 to review.

Noctua’s Take on NA-SAV3 and NA-SAV4

NA-SAV3

The NA-SAV3 is a fan accessory set consisting of 16 NA-AV3 anti-vibration mounts for up to four fans. Replacing standard fan screws, the NA-AV3 mounts enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans. Five defined, numbered pawls allow the NA-AV3 to work perfectly with both standard open corner fans (pawl 1) and 10, 14, 15, 20 or 25mm thick fans with closed corners (pawls 2 to 5). This makes the NA-AV3 ideal for slim fans where other anti-vibration mounts may not fit properly.

NA-SAV4

The NA-SAV4 is a fan accessory set consisting of 16 NA-AV4 anti-vibration mounts for up to 4 fans. Replacing standard fan screws, the NA-AV4 mounts enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans. Five defined, numbered pawls allow the NA-AV4 to work perfectly with both standard open corner fans (pawl 1) and 10, 14, 15, 20 or 25mm thick fans with closed corners (pawls 2 to 5). This makes the NA-AV4 ideal for slim fans where other anti-vibration mounts may not fit properly. With their flat case-side end, the NA-AV4s are flush with the case panel and thus provide for a clean exterior look.

Pages

Category: 

Linode VPS Hosting