Autonomous Kinn Chair Office Chair Review: Page 5 of 6

Posted by Damon Bailey on Monday, October 21, 2019 - 8:00am

Assembly

Autonomous Kinn Chair

The included manual has an assembly guide, comprised of five steps.

Autonomous Kinn Chair

Step one is to set the seat base on a table upside down.

Autonomous Kinn Chair

The back slides on until the holes line up. This required a helping hand from a second person to keep everything aligned long enough to get the bolts started.

Autonomous Kinn Chair

Step two is connecting the back and seat. Once the main bolts are tightened down, 4 more screws hold the outer edges of the back to the seat.

Autonomous Kinn Chair

Step three is snapping the casters into the base.

Autonomous Kinn Chair

The casters press into the holes with only a little pressure to keep them in place.

Autonomous Kinn Chair

Step 4 is pushing the gas strut into the base as pictured.

Autonomous Kinn Chair

And the last step is setting the seat assembly onto the gas strut.

Autonomous Kinn Chair

The strut goes up into the hole in the seat base and is held with a friction fit.

Autonomous Kinn Chair

Once in place, you can raise the seat with the lever on the right.

Autonomous Kinn Chair

Autonomous Kinn Chair

On the right side of the seat, a button allows the seat base to slide in and out to adjust the seat depth to what is comfortable for you.

Autonomous Kinn Chair

Autonomous Kinn Chair

On the right side, you also have a crank that slides in and out. This crank adjusts the recline tension.

Autonomous Kinn Chair

The left side has a lever to lock the seatback in any position you want, not just up. But that’s it, your new Kinn Chair is ready to go!